Flow Weigher DC4
Continuous Weighing with System
- Accurate, compact weighing system
- Suitable for a wide range of bulk materials, including grains, pellets, granulates, meal and bran
- Low installation height and flexible system design with practical inlet options
- Optimized housing design prevents product residues
(also suitable for seeds)
- Rechtangular design – maximum flexibility, wide range of capacities
The Flow Weigher DC4 is used for the following applications:
- Continuous weighing of bulk flow for in-plant control purpose
- Pre-weighing of bulk for truck loading processes
- Entry of quantities for silo management
The Flow Weigher DC4 continuously weighs free bulk flow.
Functions
The bulk is slowed down and fed into a pipe bend. The pipe bend is connected with a load cell. The measured force is proportional to the throughput.
Applied products
All free flowing products can be measured, e.g. grain, pulses, granules, malt, pellets, soya, diverse bruised grains and bran (special design).
Integrated interfaces as per standard:
- Analogue output 0-10V
for actual capacity - Digital output (24V DC)
for kg-pulses - Relay output (230V AC)
if preselection amount has run up - Relay output (230V AC)
for limit values - RS485 (also configurable as Modbus-RTU)
all process data can be accessed
Optionally available interfaces
- Analogue output 0(4)-20mA
for actual capacity - Profibus
all process data can be accessed - Profinet
all process data can be accessed - Ethernet/IP
all process data can be accessed - Label printer
The evaluation electronic can be connected directly to a label printer. The last weighing result is printed on keystoke. - Further interfaces are available on demand.
Catalogue
- DC4_Englisch (PDF)
Profibus interface
Profinet interface
- GSDML-file for extern evaluation electronic type FE128
- GSDML-file for intern evaluation electronic type FE730
Operating instruction
Dimension sheets
Inlet type | Feed pipe | Integrated | Applicable bulk solids: |
| E30 | 0° | No | Poor-flowing bulks, |
| E32 | 45° | Yes | Granules, grains, free-flowing bulk |
| E35 | 0° | Yes | Granules, grains, free-flowing bulk |
Size DC4-A200 (Basic housing size 200x200mm,
pipe connection DN100/DN120 or rectangular 120x120mm)
Size DC4-A250 – (Basic housing size 250x250mm,
pipe connection DN120/DN150 or rectangular 150x150mm)
Size DC4-A450 – (Basic housing size 450x450mm,
pipe connection DN200/DN250 or rectangular 250x250mm)
Size DC4-A660 – (Gehäusegröße 660x600mm,
pipe connection DN300/DN400 or rectangular 400x400mm)
Evaluation electronic type FE128 for panel installation (24 V DC)
Evaluation electronic type FE128 in wall housing (230 V AC)
Evaluation electronic type FE804 for panel installation (24V DC)
- FE804 ST (PDF)
Evaluation electronic type FE804 in wall housing (230 V AC)
- FE804 WG (PDF)