Flow Weigher DC4
Continuous weighing with a modular system
- Accurate, compact weighing system
- Suitable for a wide range of bulk materials, including grains, pellets, granulates, meal and bran
- Low installation height and flexible system design with practical inlet options
- Atex- and Food-versions available
- Optimized housing design prevents product residues
(also suitable for seeds)
Rectangular design – maximum flexibility through different inlet types, wide range of capacities
The Flow Weigher DC4 is used for the following applications:
- Continuous weighing of bulk flow for in-plant control purposes
- Pre-weighing of bulk for truck loading processes
- Recording material quantities for silo management
The Flow Weigher DC4 continuously weighs free-flowing bulk materials.

The weighing units are available in different sizes and shapes.
Note: The Flow Weigher DC4 is not approved for legal-for-trade use.
Functions
The bulk is slowed down and fed into a pipe bend. The pipe bend is connected with a load cell. The measured force is proportional to the throughput.
Applied products
All free-flowing products can be measured, e.g. grain, pulses, granules, malt, pellets, soya, diverse crushed grains and bran (special design).

For the integration of the Flow Weigher DC4 there are different inlet types available. Depending on the available space, product types and pipe construction on-site, the inlet may be chosen.
Currently, the following types can be selected:
Type E30 (0°-inlet, no integrated product brake)

Suitable for a wide range of bulk solids such as bruised grains, meals, barley and granules
- The product should not come from a high altitude and with a high acceleration prior to the inlet
- No integrated product brake
- Connection angle at the inlet 0°
********************************************
Type E32 (45°-inlet, incl. integrated 90° product brake)

Suited for flowable bulk solids, typically granules, grain and pellets
- brakes and decelerates higher product velocities
- normalizes the mutual force action in case of different product types
- reduces wear of measuring plate
- Connection of inlet pipe with 45° angle
********************************************
Type E35 (0°-inlet, incl. integrated 90° product brake)

Suited for flowable bulk solids, typically granules, grain and pellets
- brakes and decelerates higher product velocities
- normalizes the mutual force action in case of different product types
- reduces wear of measuring plate
- Connection of inlet pipe with 0° angle
********************************************
Special version in Ultra-low design:
Type E37 (0°-inlet, no integrated product brake)
Suitable for a wide range of bulk solids such as bruised grains, meals, barley and granules
- The product should not come from a high altitude and with a high acceleration prior to the inlet
- No integrated product brake
- Connection angle at the inlet 0°
- Type A200 with just 285mm in height
************************
Special constructions also available
e.g. Type E31 (0°-inlet, small housing form with DN200 pipe connections)

Suitable for granules, bruised grains, scoring/waste, but also grain/seeds.
- Connection angle at the inlet 0°
Evaluation electronic
- With 4.3″-Colour-Touchdisplay
- Display of mass flow rate and total weight in kg
- Preselection function, after expiry of a desired amount, an output is switched
- Product-specific calibration possible
- Integrated webserver (Access to the evaluation through Web-Browser)

Integrated interfaces as per standard:
- Analogue output 0-10V
for actual capacity - Digital output (24V DC)
for kg-pulses - Relay output (230V AC)
when the preset quantity has been reached. - Relay output (230V AC)
for limit values - RS485 (also configurable as Modbus-RTU)
all process data can be accessed
Optionally available interfaces
- Analogue output 0(4)-20mA
for actual capacity - Profibus
all process data can be accessed - Profinet
all process data can be accessed - Ethernet/IP
all process data can be accessed - Further interfaces are available on demand.
Brochure
Dimension sheets
Inlet type | Feed pipe | Integrated | Applicable |
| E30 | 0° | No | Poor-flowing bulks, |
| E32 | 45° | Yes | Granules, grains, free-flowing bulk |
| E35 | 0° | Yes | Granules, grains, free-flowing bulk |
Size DC4-A200 (Basic housing size 200x200mm,
pipe connection DN100/DN120 or rectangular 120x120mm)
Size DC4-A250 – (Basic housing size 250x250mm,
pipe connection DN120/DN150 or rectangular 150x150mm)
Size DC4-A450 – (Basic housing size 450x450mm,
pipe connection DN200/DN250 or rectangular 250x250mm)
Size DC4-A660 – (Basic housing size 660x660mm,
pipe connection DN300/DN400 or rectangular 400x400mm)
Evaluation electronic type FE804
for panel installation (24V DC) / in wall housing (230 V AC)
Evaluation electronic type FE128 for panel installation (24 V DC)
Evaluation electronic type FE128 in wall housing (230 V AC)
Operating instructions
Profibus interface
Profinet interface
- GSDML-file for external evaluation electronic type FE128
- GSDML-file for internal evaluation electronic type FE730
